







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterTub-to-Shower Conversion in Hayward, CA
A tub-to-shower conversion in Hayward typically costs $6,200 to $14,800 and takes three to six working days from demolition to a working drain. We pull the old tub, convert the drain from a tub waste-and-overflow to a shower drain, rebuild the waterproofing, and install a tiled or paneled shower base and walls rated for daily use. Rowan Construction Group Hayward has completed 4,000-plus projects across seven trades, and every one of them started with a written price before anyone picked up a tool.
The reason homeowners call us for this specific job is the plumbing stack, not the tile. Most Hayward homes built between 1945 and 1975 have a cast-iron or galvanized drain line under the tub and a concrete or wood-framed subfloor that may or may not accept a centered shower drain without modification. We inspect before we quote, so the number you get reflects the drain you actually have. Call (866) 863-1729 for a free estimate.
This work sits inside our larger Bathroom Remodeling service, and this page covers the tub-out, shower-in scope only.

Key Takeaways
- Typical Hayward conversion range: $6,200 to $14,800, with the drain relocation and waterproofing membrane driving most of the spread.
- We give you a flat written price and written scope before demolition, under Clause 1 of The Haven Standard. “Call for a quote” isn’t how we operate.
- Most conversions finish with a documented photo record showing the waterproofing layer before tile goes over it.
- Our technicians have up to 19 years of experience, and every crew member is background-checked and uniformed.
When You Need Tub-to-Shower Conversion
The reasons Hayward homeowners make this call are specific to the housing stock and to how people actually live in these homes. Here’s what we hear most often:
- The tub is a hazard, not a luxury. In Hayward’s single-story ranch homes from the 1950s and 1960s, the hall bath tub deck is 17 to 19 inches off the floor. For an aging parent stepping over that rim, or anyone recovering from a knee or hip surgery, a curbless shower with a linear drain removes the step entirely.
- The tub sits in a five-by-seven bathroom and eats the usable floor. Many Hayward homes in the Mount Eden and Jackson Triangle neighborhoods have one full bath under 40 square feet. Swapping an alcove tub for a 36-by-48-inch shower often gains 8 to 10 square inches of walkable floor while keeping the same footprint.
- The tub drain base is leaking into the subfloor. Cast-iron tub traps in Hayward homes from that era rust out from the inside. If you see a stain on the ceiling below the bath, or smell damp plaster in the hallway, the conversion simplifies the repair because the tub comes out anyway.
- Nobody in the house takes baths. A 60-inch tub filled weekly is a lot of real estate for a feature that goes unused. Daily-showering households get more from a walked-in shower with a bench and a thermostatic valve.
- The existing tub surround is original 1960s tile with failing grout and no waterproofing behind it. Once the wall is open, a proper conversion replaces the drywall-behind-tile approach that was common before the 1980s with a bonded waterproofing membrane or cement board and liquid membrane.
- You’re planning a bathroom renovation anyway. A tub-to-shower conversion is often the single largest improvement in a small bath remodel, and it’s the change most likely to extend the room’s useful life by 20 plus years.

Our Tub-to-Shower Conversion Process
Here’s what the three to six working days look like from the first visit to the last caulk line:
- Site visit and drain inspection. We measure the alcove, inspect the tub waste-and-overflow assembly, and check the subfloor condition at the drain cutout. We photograph the condition of the existing waterproofing or lack of it, so you can see what we see. This is also when we identify whether the drain line is cast iron, PVC, or galvanized.
- Written price and written scope. You get a flat price, a line-item scope, and a written warranty before we schedule demolition. If the drain has to move off-center or the subfloor has to be replaced once the tub is out, that’s a signed change order first. No work proceeds on a change until you’ve signed it.
- Demolition and rough-in. The tub, surround, and any failing drywall come out. We cap the tub waste-and-overflow and install the new shower drain, which sometimes requires cutting and re-routing the drain line under the floor. This is the step where a licensed plumber matters most, and it’s why we don’t hand this part off to a handyman.
- Waterproofing and shower base. We install cement board or a foam board bonded membrane system, tape and mortar the seams, and apply a liquid or sheet membrane to the pan and walls. The photo record captures this layer before tile goes over it, which is proof of what’s behind the finish.
- Tile, panel, and fixtures. We set the floor and wall finish, install the valve trim, shower head, and glass or curtain, and grout. Kohler and Moen are what we specify most often for the trim and valve, and they’re on our vetted brand list for the same reason: parts availability and standardized cartridges.
- Final walkthrough and documentation. We run the shower, check the drain flow, and confirm the pan holds water. You leave with the photo record, the written warranty, and the signed scope. If anything isn’t right within 365 days, the 365-Day Done Right Promise has us come back and make it right.
Tub-to-Shower Conversion Pricing in Hayward
Here’s the honest breakdown for an alcove conversion in a standard Hayward bathroom. Every number is a range, because the drain situation and the finish level drive most of the spread.
| Line item | Typical range | What moves the number |
|---|---|---|
| Demolition and haul-away | $450 – $900 | Tub material (cast iron weighs more than acrylic), tile thickness, stair access |
| Drain conversion (tub waste-and-overflow to shower drain) | $650 – $1,600 | Whether the drain can stay centered; cast-iron cutting and fernco couplings |
| Subfloor repair and framing | $300 – $1,400 | Rot from old leaks, joist spacing for a mud-set or foam pan |
| Waterproofing membrane and shower pan | $800 – $2,200 | Bonded sheet vs. liquid membrane, curb vs. curbless with linear drain |
| Wall and floor tile (material) | $900 – $3,500 | Porcelain vs. ceramic, tile size, mosaic, slab-look panels |
| Tile labor | $1,400 – $3,200 | Layout complexity, niche, bench, mosaic accents |
| Valve, trim, and shower head | $350 – $1,100 | Thermostatic vs. pressure-balance; Moen and Kohler lines |
| Glass enclosure or curtain rod | $450 – $2,400 | Framed vs. frameless glass, hinged vs. sliding |
| Permit (Hayward Building Services) | $150 – $500 | Scope; a drain relocation plus valve replacement usually requires one |
Added together, the realistic range for a standard alcove conversion in Hayward runs $6,200 to $14,800. A curbless linear-drain conversion with frameless glass and natural stone can reach $18,000 or more. A simple acrylic-pan and panel system with a curtain rod can come in under $5,500. We give you both the high and low ends of your specific scope in writing, not a single teaser number.
What affects cost the most in Hayward specifically: first, whether the existing drain line can stay centered (in a 60-inch alcove, moving a cast-iron drain 8 inches is a different job than leaving it); second, the condition of the subfloor at the drain, which we can’t fully know until the tub is out; third, the finish level, meaning tile vs. prefab panels and framed vs. frameless glass. We quote the drain inspection honestly, and we don’t guess at the subfloor to get you a lower number.
Under Clause 1 of The Haven Standard, the price is written before anyone starts. If a change does come up, the change order comes to you, signed, before work moves forward. That discipline is why our projects finish within a few percent of the agreed cost.
Bring us a competitor’s written estimate and we’ll review it line by line at no charge. That’s our Free Second Opinion offer, and it’s standing, not a promotion.
FAQs – Tub-to-Shower Conversion
How much does a tub-to-shower conversion cost in Hayward?
Most Hayward tub-to-shower conversions land between $6,200 and $14,800 for a standard alcove replacement. The two biggest cost drivers are whether the drain can stay centered (a $650 to $1,600 line) and the finish selection (tile vs. panel, framed vs. frameless glass). Call (866) 863-1729 for an exact written quote. Estimates are free, and we don’t do a single number range on the phone and a bigger number on paper.
Can you convert my tub to a shower in under a week?
Yes, a standard alcove conversion usually takes three to six working days at your house, and most Hayward homes have a working shower within that window. The reason the timeline is knowable is that we inspected before we quoted, so the demolition surprises are minimized. If the subfloor or drain line turns out worse than expected, the change order and revised timeline come to you before any work continues. Call (866) 863-1729 to schedule the site visit.
Do I need a permit for a tub-to-shower conversion in Hayward?
Usually, yes. A conversion that moves or replaces the drain and installs a new shower valve is a plumbing and building permit scope in Hayward, and it’s typical to pull one through Hayward Building Services. A simple tub removal and prefab shower pan replacement is sometimes exempt, but we confirm that before demolition. Any licensed contractor who’s done these knows the difference. Call (866) 863-1729 and we’ll tell you what your specific scope will require.
Is it cheaper to refinish my tub or convert to a shower?
Refinishing is cheaper up front ($500 to $900 typically) but it doesn’t solve the real problems behind a conversion call: a failing drain, a step-over hazard, or outdated waterproofing. A conversion costs more because it addresses the drain and the waterproofing membrane behind the finish, not just the surface. If the drain and subfloor are sound and you just want a new look, a refinish may be the honest recommendation. We’ll tell you which you need. Call (866) 863-1729 for a free estimate either way.
What brands do you use for shower valves and trim?
Moen and Kohler are the two we specify most often for Hayward conversions, because both maintain standardized cartridges and broad parts availability, which matters when a valve needs service in year eight. We source across 50-plus vetted material brands, so if you want a specific trim line, we can usually get it. Your written quote lists the brand and model, not just “chrome trim.” Call (866) 863-1729 to talk through the choices.
Do you offer a warranty on the conversion?
Yes. Every conversion is covered by the 365-Day Done Right Promise: if it isn’t done right within 365 days, we come back and make it right. That’s printed on the page, backed by a terms page, not an asterisk, and it applies to the work, the waterproofing, and the install. You also get the photo record from the visit as a standard deliverable. Call (866) 863-1729 for a free estimate and the written warranty terms.
Which Hayward neighborhoods do you work in?
All of them, from the 1950s ranch homes in the Hayward Hills and Fairview to the older bungalows near downtown and the Jackson Triangle. Each neighborhood has its own drain-line story, and we’ve worked in enough of them to know what to look for. Pair this conversion with a broader Bathroom Remodeling in Hayward scope if the vanity, tile, and lighting are on your list too. Call (866) 863-1729 to schedule a site visit.
Safety and What to Look For Before You Choose a Contractor
A tub-to-shower conversion involves moving a shower drain, cutting into a subfloor, and sometimes opening a wall near a valve. That’s plumbing work, and it’s genuinely risky if done wrong: a mis-soldered or glued drain joint can leak silently under the floor for months, and a shower pan that isn’t properly sloped can send water into the framing. We recommend a licensed plumber for the drain and valve portion and a contractor who will put the waterproofing details in the written scope. If a bid you receive doesn’t mention the waterproofing method or the drain relocation, treat it as an incomplete bid.
- Ask how the waterproofing membrane is specified (bonded sheet, liquid-applied, or foam board) and require it in writing.
- Confirm the plumber who does the drain is licensed; a shower drain cut into a cast-iron line is not a handyman task.
- Ask for the permit scope in writing. A permit pulled after the work is a red flag.
- Request a photo of the waterproofing layer before tile goes over it. We include that in every visit’s record.
Why Homeowners in Hayward Choose Rowan Construction Group
We’re a construction contractor that puts the number in writing before anyone picks up a tool, and that’s not a slogan, it’s the discipline behind every proposal we hand over. Our technicians have up to 19 years of experience, and every crew member is background-checked and uniformed, with a live person answering calls 24/7. Every visit comes with a documented photo record as a standard deliverable, not an add-on. When you compare our written estimate to another, bring theirs and we’ll review it line by line at no charge. That’s the Free Second Opinion offer, and it’s yours to use.
Call (866) 863-1729 for a free estimate on your Hayward tub-to-shower conversion. We’ll schedule the site visit, check the drain and subfloor, and hand you a written price and scope before any work begins.
Written by the team at Rowan Construction Group Hayward, serving Hayward.


