







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVanities, Tile & Fixtures in Hayward, CA
Replacing a vanity, retiling a shower floor, or swapping out a leaking faucet in Hayward costs $650 to $4,800 for most jobs, depending on scope and material. We handle all three as one coordinated piece of your bathroom work, so the vanity sits plumb against a substrate that’s actually flat, the tile membrane is specified before anyone sets a stone, and the fixtures you chose are the ones that get installed. Vanity, tile and fixture work sits inside the larger Bathroom Remodeling trade we run every week in Hayward, and this page covers that slice of the work in detail.
Rowan Construction Group Hayward has delivered bathroom work across the East Bay since 2007, and the tile-and-fixture portion is where most of the hidden damage shows up. A 1940s Hayward cottage on a pier-and-beam foundation moves differently from a 1990s tract home in Southgate, and the tile substrate above a moving floor will crack at the grout line within a year if it isn’t uncoupled properly. Our technicians have up to 19 years of experience reading exactly that condition, and the written scope names the substrate preparation and membrane type before anyone picks up a trowel.
Call (866) 863-1729 for a written price on vanity, tile or fixture work. A live person answers, not a voicemail, and the price you screenshot is the price on the work order.
Key Takeaways
- Vanity, tile and fixture work in Hayward runs $650 – $4,800 for most jobs, with a written scope before work starts.
- Substrate condition is the difference between tile that lasts 20 years and tile that cracks at the grout in 12 months.
- Kohler and Moen fixtures cost more up front than builder-grade, and their servicing and replacement parts are easier to source locally.
- Our technicians have up to 19 years of experience, and the 365-Day Done Right Promise covers every job we finish.

When You Need Vanities, Tile & Fixtures
These jobs come up for specific reasons. Here’s what we regularly see in Hayward homes.
- Water stains around the vanity base. Laminate tops fail at the seams, especially in mid-century Hayward homes where a vanity was set against an exterior wall with no air seal behind the cabinet. Water runs down the sides and softens the particleboard floor of the cabinet before anyone notices.
- Cracked grout lines in the shower, recurring. If you’ve regrouted twice and the cracks return at the same spot, the substrate is moving. That’s a membrane problem, not a grout problem.
- Faucet or shower valve leaking at the body, not the aerator. A leak at the valve body means the cartridge or the mixer is failing, and on older Hayward plumbing it often means the rough-in is behind a wall the original builder furred out, so access needs planning.
- Tile at the tub surround popping off the wall. Thinset bond fails when the wall behind it was never properly prepped. We pull a tile, look at what’s behind, and show you with a photo.
- Outdated vanity blocking function. A standard 30-inch vanity in a tight Hayward hall bath often leaves a grown adult with feet in the door swing. Sizing is a real design decision, not a swap.
- Fixtures at the end of their service life. A 20-year-old Delta shower valve with a discontinued cartridge is a fixture that will strand you at the worst time. Replacement on a scheduled day, not an emergency Saturday, is the cheaper route.
Our Vanities, Tile & Fixtures Process
- Photo-documented inspection. We photograph the vanity plumbing, the tile field, the substrate behind any failed tile, and the fixture rough-ins. Under our standard process, the photo record is included as a deliverable, not an add-on.
- Written scope and flat price. You get a written price with a written scope and a written warranty before work begins. No “call for a quote,” no range on the invoice. You have a number you can compare against anything else.
- Material selection with real sourcing. We name the actual brand and model in the scope: Kohler or Moen for faucets and shower valves, Delta for value-conscious replacements. Tile is selected with the grout joint width and the underlying substrate specified, not just the look.
- Substrate prep and membrane specification. The tile membrane is the layer that keeps moisture out of the wall cavity and uncouples tile from floor movement. We specify the membrane and the thinset before any tile sets.
- Fabrication and install. Vanity set, plumbing roughed in to the new valve, tile set and grouted, fixtures installed, water-tested, and photographed at each stage.
- Final walk-through and warranty sign-off. You get the photo record, the written warranty, and the 365-Day Done Right Promise: if it is not done right, we make it right.
If your vanity, tile or fixture work is part of a broader project, it fits cleanly inside our Bathroom Remodeling in Hayward scope and we sequence it with the rest of the trade work so the tile isn’t set before the plumbing is final.

Vanities, Tile & Fixtures Pricing in Hayward
Most jobs in this category land between $650 and $4,800, and the range depends on scope and material grade more than anything else. Here are the line-item ranges we typically see.
| Job | Typical Range | What Sets the Price |
|---|---|---|
| Vanity replacement (cabinet, top, faucet) | $950 – $2,800 | Cabinet size, top material, faucet brand |
| Faucet or shower valve replacement | $285 – $720 | Access, valve brand, cartridge availability |
| Tile shower floor or tub surround retile | $1,600 – $4,800 | Square footage, membrane type, tile pattern |
| Tile repair (cracked or popped tile) | $320 – $880 | Matching tile, substrate condition behind |
| Backsplash or floor tile (small area) | $650 – $1,900 | Linear feet, tile type, substrate prep |
| Full fixture package (vanity faucet + shower valve + trim) | $1,200 – $2,600 | Brand tier, rough-in condition |
What moves the number up or down:
- Substrate condition. Tile over a properly prepared substrate with membrane sits at the low end. Tile over failed thinset, water-damaged drywall, or a floor that needs self-leveling climbs toward the high end.
- Fixture brand. Kohler and Moen cost more than builder-grade but have better service life and part availability. Delta sits in the middle for value-conscious replacements. We name the brand in the scope, not just a price.
- Tile size and pattern. Large-format tile needs fewer grout joints and more careful setting. Herringbone and small mosaic patterns cost more in labor.
- Access. A valve behind a finished wall may need an access panel cut and patched, which is a real cost line.
The written price is a flat price with a written scope and a written warranty. Free second opinion on any written estimate: bring a competitor’s quote and we’ll review it line by line at no charge. Call (866) 863-1729 for an exact quote on your Hayward job, estimates are free.
Does the 365-Day Done Right Promise cover tile work?
Yes. Every job we finish carries the 365-Day Done Right Promise: if it is not done right, we make it right. That covers a tile that fails at a grout joint within the year, a faucet that leaks at the body, and a vanity that doesn’t sit flush against the wall. Call (866) 863-1729 to schedule a look.
FAQs – Vanities, Tile & Fixtures
How much does vanity replacement cost in Hayward?
Vanity replacement in Hayward typically costs $950 – $2,800 for a full swap (cabinet, top and faucet), depending on the cabinet size and whether the top is quartz, solid surface or laminate. The bigger variable is the wall the vanity sits against: on older Hayward homes, the wall may need to be furred out or repaired before the new cabinet sits plumb. Call (866) 863-1729 for an exact written price, estimates are free.
Can you fix a cracked tile without redoing the whole shower floor?
Yes, most single cracked tiles can be replaced individually if the substrate behind is sound and the tile has a match. If the tile popped because the substrate is bad, replacing the tile alone is usually a short-term fix. We photograph what’s behind the tile before quoting and show you the picture before any work begins. Call (866) 863-1729 for a free estimate on a tile repair in Hayward.
What’s the difference between Kohler and Moen fixtures?
Both are quality brands, and the choice usually comes down to specific product lines and parts availability rather than overall reliability. Kohler tends to have more design range and higher price point on premium lines; Moen has a strong reputation on shower valves and cartridge replacement. We name the brand and model in the written scope so you’re comparing like with like. Call (866) 863-1729 and we’ll walk you through the options for your Hayward project.
Do you provide a written price before work starts?
Yes, every job gets a flat written price with a written scope and a written warranty before work begins. That’s Clause 1 of The Haven Standard, and it’s how we approach vanities, tile and fixtures the same way we approach every other trade. Call (866) 863-1729 and we’ll get the scope and the number in your hands before anyone picks up a tool.
Written by the team at Rowan Construction Group Hayward, serving Hayward.


