







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Hayward Homeowners Choose Kohler Construction
Rowan Construction Group Hayward provides independent Kohler construction service in Hayward for homeowners who already own Kohler fixtures or are choosing them for a remodel. We are not affiliated with or authorized by Kohler. What we bring instead is weekly hands-on work with Kohler’s spec sheets, rough-in dimensions and trim kits, so installations fit right the first time and repairs hold in East Bay water.
Whether your bathroom is a 1950s stucco tract home on alluvial ground near Mission Boulevard or a hillside ranch in the Hayward Hills, we quote a flat written price before any work starts and stand behind it for 365 days under our Done Right Promise. Alameda County permits and inspections are part of the scope, not an extra.
Call (866) 863-1729 for a free estimate and a written price on your Kohler project.
Key Takeaways
- Independent Kohler service, not manufacturer-authorized repair.
- Memoirs, Archer, Kathryn, Bellwether, Villager, Purist and Artifacts covered.
- Flat written price before work starts, 365-day Done Right Promise.
- Genuine Kohler OEM parts on load-bearing and finish-matched components.
Why Trust Rowan Construction Group Hayward for Your Kohler Construction?

Our technicians have up to 19 years of experience and know Kohler’s product lines from the inside. When a Memoirs comfort-height toilet arrives with its canister flush assembly in the box, we know the difference between that assembly and the older floating-flapper design before we lift the lid. When we rough in a Purist thermostatic valve, we know the required rough-in depth for Kohler’s plaster guard and trim ring, and we know where tile thickness changes it. That is the difference between a shower that holds temperature for 15 years and one that leaks behind the wall in two.
We use genuine Kohler OEM cartridges, valve bodies, flush assemblies and trim on anything load-bearing or finish-matched, so the finish code and flow rates stay what Kohler specified and the warranty is protected. Commodity items – supply lines, seals, gaskets – get quality aftermarket parts, which is where aftermarket makes sense and price stays honest.
Every visit includes a documented photo record of what we found and what we replaced, standard, not an add-on. If a Kohler fixture fails within a year of our work, the Done Right Promise means we make it right under The Haven Standard. Bring us a competitor’s written estimate and we’ll second-opinion it line by line at no charge, because we’d rather you compare the numbers than guess.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Kohler Construction Problems We Fix in Hayward
Kohler builds good fixtures. What usually fails here is not the ceramic or the cast iron, it’s the parts that wear and the water that wears them. These are the calls we take most often in Hayward:
- Memoirs two-piece and one-piece toilets with a constant running fill. A failed fill valve or flapper lets the tank run quietly for months. The overflow water coats the tank bolts in mineral scale, then the bolts start to corrode and eventually the tank wobbles or leaks at the base. Repair the valve and the flapper early and the tank stays solid.
- Bellwether and Villager cast-iron tubs with chipped enamel at the drain. The coating chips first at the drain where water and cleaning products concentrate. Once the iron or acrylic core is exposed, water gets behind the enamel edge and softens the surrounding substrate underneath. That is where a tub-to-shower conversion usually costs less over ten years than repeated patching.
- Purist and Artifacts thermostatic shower valves that lose temperature control or drip at the handle. Hard East Bay water scales the thermostatic cartridge. The result is a shower that swings hot and cold or drips when off. Most often the cartridge is the problem, not the valve body, and a proper cartridge replacement with the correct Kohler part restores it.
- Memoirs lavatory pedestals and undermount sinks with a slow drain or a loosening seal. The pop-up assembly and the drain seal are where the failures show up first. Hayward’s mineral content accelerates lime buildup on the drain stem, so the pop-up sticks and the seal starts to seep under the sink.
- Kohler vanity and mirrored cabinet units with sagging hinges and lifting finish. Humidity in a Hayward bathroom that runs a shower hard without a good exhaust fan will lift the finish on cabinet doors and cabinets’ hinges will sag over time. We install and re-hang Kohler vanities with the correct wall anchors and moisture-aware placement.
Kohler Parts & Our Repair-vs-Replace Approach

Parts get sourced per job. We don’t stock Kohler parts locally, and we don’t claim to. For every Kohler repair or install, we identify the exact model and finish – the part number matters because Kohler changed cartridge families across generations of Memoirs and changed flush technology on its toilets – then order the OEM part that matches the fixture you actually have.
Genuine Kohler OEM parts go on any load-bearing or finish-matched component: shower cartridges and valve bodies, flush assemblies, trim kits, tank bolts, and finished hardware where matching the color and PVD finish matters. Aftermarket parts go only on commodity items: supply lines, seals, gaskets. That habit is what keeps the price honest without compromising the wear points.
Our repair-versus-replace call is simple to explain. On a Kohler fixture under about 20 years old with an intact valve body or substrate, repair the failing part. On a fixture past roughly 20 years where the substrate or valve body is compromised – a cast-iron tub with soft substrate at the drain, a shower valve body with a corroded core – replacement almost always costs less over ten years than continuing to repair. We say so plainly, with the numbers written, not as a sales pitch.
Call (866) 863-1729 for a free estimate on a Kohler repair or replacement in Hayward.
Our Kohler Service Process – Step by Step
- 1
Diagnosis. We identify the exact Kohler model and series – Memoirs, Archer, Kathryn, Purist, Artifacts, Bellwether, Villager – and photograph the condition. We test the valve, the flush, the drain, or the hinge depending on the call, then put the finding in writing.
- 2
Written price and scope. Under Clause 1 of The Haven Standard, the flat written price and scope arrive before any work starts. You know what’s being replaced and what it costs before a tool comes out, along with a note on what the work will and won’t change.
- 3
Repair or install. OEM Kohler parts go in, the rough-in depth is checked if it’s a shower valve, the tile seal and waterproofing are confirmed, and any ACO or permit-required work is documented.
- 4
Test. We pressure-test, cycle the valve, check the flush and fill, and check the drain. You watch the test. Then we photograph the finished work.
- 5
Warranty and documentation. The written warranty and the photo record go to you at the end of the visit, and the 365-Day Done Right Promise stands behind the work.
See the difference
Before
After
Before
After
Before
AfterKohler Products We Service & Install in Hayward
We work on the Kohler lines Hayward owners actually have in their homes. That covers Memoirs and Memoirs Stately toilets and lavatories, Archer and Kathryn baths and shower fixtures, Bellwether and Villager cast-iron and acrylic tubs, and Purist and Artifacts shower trim and faucet lines. Our bathroom work here leans on three sub-services: walk-in shower installation and shower remodeling, tub-to-shower conversion, and bathroom vanity installation. If your fixture isn’t on this list, send us the model number from the tank lid or the trim plate and we’ll confirm what we can do before you commit to anything.
We Also Service These Brands
Kohler is one line among fifty-plus brands we work with. Our remodeling projects routinely mix KraftMaid and Wellborn cabinets, Cambria and Caesarstone countertops, GAF and Owens Corning roofing, PGT windows and doors, and Master Halco fencing into the same job. That multi-brand reach means a Kohler bathroom remodels alongside the rest of your house without a second contractor stepping in. One written price, one crew, one point of contact.
FAQs – Kohler Construction Service in Hayward

No. We are an independent Kohler installer and remodeler, not an authorized Kohler dealer or service provider, and we don’t imply manufacturer authorization. What that means for you: we buy genuine Kohler OEM parts and install them to Kohler’s specifications, but any warranty claim on the fixture itself goes through Kohler. Our 365-Day Done Right Promise covers our workmanship.
Yes on any load-bearing or finish-matched component: cartridges, valve bodies, flush assemblies, trim kits, tank bolts, and finished hardware. We use quality aftermarket parts only on commodity items like supply lines, seals and gaskets. We source OEM parts per job once we’ve confirmed your exact model and finish, because Kohler’s cartridge and flush families changed across generations and the wrong part will not fit or will not last.
A cartridge or flush repair is typically a single visit of a few hours. A tub-to-shower conversion or a walk-in shower install runs several days to a couple of weeks depending on tile and waterproofing. We give you the timeline in writing with the price, so you know before you commit.
We service and install Memoirs and Memoirs Stately toilets and lavatories, Archer and Kathryn baths and shower fixtures, Bellwether and Villager tubs, and Purist and Artifacts shower trim and faucets. For anything outside those lines, send us the model number and we’ll confirm coverage before scheduling.
Not if the work is done with genuine OEM parts to Kohler’s specs, which is how we do it. Using aftermarket parts on load-bearing components can put a manufacturer warranty at risk. We keep the OEM part numbers on the invoice so you have a record if a warranty question ever comes up.
It depends on the scope, but these are the Hayward ranges we quote:
| Service | Typical Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
Call (866) 863-1729 for an exact quote. Estimates are free, and the price we put in writing is the price you pay unless you sign a change order.
Book Your Kohler Service in Hayward, CA
If your Kohler shower valve has stopped holding temperature, your Memoirs toilet is running, or your cast-iron tub has chipped at the drain, call Rowan Construction Group Hayward at (866) 863-1729. You’ll get a free estimate, a flat written price before any work starts, and the 365-Day Done Right Promise behind the work.
Written by the team at Rowan Construction Group Hayward.












